这是一个创建于 1803 天前的主题，其中的信息可能已经有所发展或是发生改变。
配置如下：
# Squid normally listens to port 3128
always_direct allow all
ssl_bump bump all
sslproxy_cert_error allow all
http_port 3128 ssl-bump cert=/etc/squid/squid.pem key=/etc/squid/squid.pem generate-host-certificates=on options=NO_SSLv2
#http_port 3128
cache_peer 127.0.0.1 parent 10809 0 no-query
never_direct allow all
我测试了一下，它并没有通过 127.0.0.1:10809 上网？但是让我改成如下时，却生效了。
http_port 3128
cache_peer 127.0.0.1 parent 10809 0 no-query
never_direct allow all
这是为什么？
完整配置
#
# Recommended minimum configuration:
#
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
always_direct allow all
ssl_bump bump all
sslproxy_cert_error allow all
http_port 3128 ssl-bump cert=/etc/squid/squid.pem key=/etc/squid/squid.pem generate-host-certificates=on options=NO_SSLv2
#http_port 3128
cache_peer 127.0.0.1 parent 10809 0 no-query
never_direct allow all
# Uncomment and adjust the following to add a disk cache directory.
cache_dir ufs /var/cache/squid 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/cache/squid
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
dns_nameservers 8.8.8.8
3 条回复 • 2020-01-14 07:48:12 +08:00
 |
1
foam 2020-01-13 23:29:29 +08:00
你的 cert 和 key 怎么是同一个文件
|
 |
2
ericFork 2020-01-13 23:31:47 +08:00
`squid -k check` 看看先？以及 cache.log 里有没有报错
|
 |
3
z888888cn OP @ericFork @foam 我在老外 Squid 论坛发帖子了，暂时不支持，要等到 v5 版本。
原贴： http://squid-web-proxy-cache.1019090.n4.nabble.com/Squid-configuration-cache-peer-does-not-take-effect-td4688860.html @foam 为啥是同一个文件，因为 cert 和 key 是合在一起的，官方教程就是这样的，至于为啥我也不知道。 |
Select Language